Supermicro 8052-6, User Manual

Page: 31 / 110

Chapter 5: Advanced Serverboard Setup
5-3
1. Lift the lever on the CPU socket: lift
the lever completely or you will dam-
age the CPU socket when power is
applied . (Install CPU1 first.)
Socket lever
2. Install the CPU in the socket. Make
sure that pin 1 of the CPU is seated on
pin 1 of the socket (both corners are
marked with a triangle). Install a CPU
into CPU socket #1 first (you may in-
stall either two or four CPUs).
Pin 1
3. Press the lever down until you hear
it *click* into the locked position.
Socket lever in
locked position
Note: You need a pair of identical 603 clips (shown on left above) for each
Gallatin 1.9 - 2.8GHz CPU. You need a pair of identical 603E clips (shown
on right above) for each Foster 1.4 - 1.6GHz CPU.
MP Processors