Supermicro 8014T-T, User Manual

Page: 77 / 124

Chapter 7: BIOS
7-9
options for Serial Port 1 are Disabled, 3F8/IRQ4 , 3E8/IRQ4, 2E8/IRQ3. The options
for Serial Port 2 are Disabled, 2F8/IRQ3 , 3E8/IRQ4 and 2E8/IRQ3.
Advanced Chipset Settings
This item allows the user to confi gure the Advanced Chipset settings for the sys-
tem.
NorthBridge Confi guration
This feature allows the user to confi gure the settings for the Intel E7520 NorthBridge
chipset.
Memory Remap Feature
Select Enabled to allow remapping of the overlapped PCI memory above the total
physical memory. The options are Enabled and Disabled.
Max. Payload of Slot#5/Slot#6
This feature allows the user to set the maximum payload size that PCI-Exp. Slot#5/
Slot#6 can support for Transaction Layer Packets (TLPs). The options are 128B
and 256B.
SouthBridge Confi guration
This feature allows the user to confi gure the settings for the Intel ICH South Bridge
chipset.
Power Button Instant-Off
If set to Enabled, the system will power off immediately as soon as the user hits the
power button. If set to Disabled, the system will power off when the user presses the
power button for 4 seconds or longer. The options are Enabled and Disabled.
Intel PCI-X Hub Confi guration
Slot#1/Slot#2/Slot#3/Slot#4 Bus Frequency
This option allows the user to set the maximum PCI speed to be used in the PCI
slot specifi ed. Select "Auto" to allow the BIOS automatically detect the capability of
the device installed on the bus. The options for Slot 1 are Auto, 33 MHz PCI, 66
MHz PCI, 66 MHz PCI-X, and 100 MHz PCI-X. The options for Slot 2 to Slot 4 are
Auto, 33 MHz PCI, 66 MHz PCI, 100 MHz PCI-X, and 133 MHz PCI-X.
I/O Port Decode
This option allows the user to select the decode range for the I/O connections. The
options are 4K Decode and 1K Decode.
VGA 1G-Bit Decode
Select Enabled to enable the function of decoding VGA for the devices installed
behind the PXH PCI Controller Hub. The options are Enabled and Disabled.