Chapter 6: BIOS
83
6.8 Save & Exit
Use this option to save, discard, or reset setting changes.
Save Options
Save Changes and Reset
When you have completed the system configuration changes, select this option to save all
changes made and reset the system.
Discard Changes and Exit
Select this option to quit the BIOS Setup without making any permanent changes to the
system configuration and reboot the computer. Select Discard Changes and Exit from the
Exit menu and press <Enter>.
Save Changes
When you have completed the system configuration changes, select this option to save all
changes made. This will not reset (reboot) the system.
Discard Changes
Select this option and press <Enter> to discard all the changes and return to the AMI BIOS
Utility Program.
Default Options
Restore Optimized Defaults
To set this feature, select Restore Optimized Defaults and press <Enter>. These are factory
settings designed for maximum system performance but not for maximum stability.
Save as User Defaults
To set this feature, select Save as User Defaults from the Exit menu and press <Enter>. This
enables the user to save any changes to the BIOS setup for future use.
Restore User Defaults
To set this feature, select Restore User Defaults from the Exit menu and press <Enter>. Use
this feature to retrieve user-defined settings that were saved previously.
Boot Override
This feature allows the user to override the Boot Option Priorities sequence in the Boot menu
and immediately boot the system with another device specified by the user. This is a one-
time override.
Summary of Contents for 656531
Page 1: ...USER S MANUAL Revision 1 0 SuperServer 5019A FTN4...
Page 20: ...20 Chapter 3 Component Installation and Maintenance Figure 3 1 Removing the Chassis Cover...
Page 114: ...114 SuperServer 5019A FTN4 User s Manual WARNINGS 1 100V 240V 10 2 3 4 1 2 3 4 5 1 2 3 4...
Page 115: ...Appendix E Standardized Warning Statements Traditional Chinese 115 1 2 3 4 1 2...
