Chapter 6: BIOS
57
VT-d
Select Enabled to enable Intel Virtualization Technology support for Direct I/O VT-d
by
reporting the I/O device assignments to VMM through the DMAR ACPI Tables. This feature
offers fully-protected I/O resource-sharing across the Intel platforms, providing the user with
greater reliability, security and availability in networking and data-sharing. The options are
Disabled and
Enabled
.
Interrupt Remapping
Use this feature to enable Interrupt Remapping support, which detects and controls external
interrupt requests. The options are Disabled and
Enabled
.
NonVolatile Memory Setup
Method
Use this feature to select how data will be saved after power loss. The options are
Dis-
abled
and NVDIMM.
*If the feature above is set to NVDIMM, the following items will become available
for configuration:
SoC Pwr Loss Support
Use this feature to enable the internal detection of an Asynchronous DRAM Refresh
(ADR) entry instead of a CPLD. The options are
Disabled
and Enabled.
Cache Flushing
Use this feature to select the amount of cache that should be flushed. The options are
MemCtrlr only
and L1, L2 and MemCtrlr.
ADR State Source
Use this feature to select whether the ADR State source is internal or external. The op-
tions are
external
and internal.
Internal Pwr Loss Event Setup
SoC Pwr Loss Support
The feature is always
Disabled
.
PMC Reset
Enable this feature to receive a notification when there is a global reset because of an
SMBus slave power down. The options are
Disabled
and Enabled.
Summary of Contents for 656531
Page 1: ...USER S MANUAL Revision 1 0 SuperServer 5019A FTN4...
Page 20: ...20 Chapter 3 Component Installation and Maintenance Figure 3 1 Removing the Chassis Cover...
Page 114: ...114 SuperServer 5019A FTN4 User s Manual WARNINGS 1 100V 240V 10 2 3 4 1 2 3 4 5 1 2 3 4...
Page 115: ...Appendix E Standardized Warning Statements Traditional Chinese 115 1 2 3 4 1 2...
