Supermicro 6048R-E1CR60L, User Manual

Page: 76 / 82

Chapter 7: BIOS
7-39 7-38
S
UPER
S
TORAGE
S
YSTEM 6048R-E1CR60N/L User's Manual

Delete Boot Option
Use this item to select a boot device to delete from the boot priority list.
Delete Boot Option
Select the target boot device to delete from the boot priority list.

Hard Disk Drive BBS Priorities
•
Legacy Boot Order #1

Network Drive BBS Priorities
•
Legacy Boot Order #1 - # 8

USB Key Drive BBS Priorities
•
Legacy Boot Order #1

UEFI USB Key Drive BBS Priorities
•
UEFI Boot Order #1
7-8 Save & Exit
This submenu allows the user to configure the following Save & Exit settings:
Discard Changes and Exit
Select this item to exit from the BIOS setup without making any permanent changes
to the system configuration, and reboot the computer.
Save Changes and Reset
When you have completed the system configuration changes, select this item to
leave the BIOS setup utility and reboot the computer for the new system configura
-
tion parameters to take effect. Select Yes and press <Enter> to save the changes
you've made and reboot the system.
Save Options
Save Changes
When you have completed the system configuration changes, select this item to
save all changes made. This will not reset (reboot) the system.
Discard Changes
Select this item to discard all the changes and return to the AMI BIOS setup utility.
Select Yes and press <Enter> to discard all changes made.
Restore Defaults
Select this item and press <Enter> to load the manufacture default settings which
are designed for maximum system performance but not for maximum stability.
Save As User Defaults
Select this item and press <Enter> to save the current BIOS settings as user's
default settings for future use.
Restore User Defaults
Select this item and press <Enter> to retrieve the user-defined default settings that
were previously saved to be used as current default settings.
Boot Override
This feature allows the user to override the boot priority sequence in the Boot sub-
menu and immediately boot the system with another device specified by the user.
This is a one-time override.