Supermicro 6027TR-H70FRF, User Manual, Page: 3 / 134

iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC technicians.
It provides information for the installation and use of the SuperServer
6027TR-H70QRF/H70FRF/H70RF. Installation and maintainance should be
performed by experienced technicians only.
The SuperServer 6027TR-H70QRF/H70FRF/H70RF is a high-end server based
on the SC827HQ-R1620B 2U rackmount chassis and the dual processor
X9DRT-HIBQF/HIBFF/HF serverboard. All models have an IPMI LAN port and four
serverboard nodes with three hot-swap Hard Disk Drives (HDD) each per node.
Each of the various models of the SuperServer 6027TR-H70QRF/H70FRF/H70RF
servers and their associated serverboards for each of their unique options are listed
in the table below:
SUPERSERVER 6027TR-H70QRF/H70FRF/H70RF Model Variations
Server
Model
X9DRT
Serverboard
Infi niBand
QDR
Infi niBand
FDR
6027TR-H70QRF X9DRT-HIBQF YES
6027TR-H70FRF X9DRT-HIBFF YES
6027TR-H70RF X9DRT-HF
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the X9DRT-HIBQF/HIBFF/HF
serverboard and the SC827HQ-R1620B chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer
6027TR-H70QRF/H70FRF/H70RF into a rack and check out the server confi guration
prior to powering up the system. If your server was ordered without processor and
memory components, this chapter will refer you to the appropriate sections of the
manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.