Supermicro 5038AD-I, User Manual

Page: 89 / 158

Chapter 6: Advanced Chassis Setup
6-13
6-7 Installing Expansion Cards
Installing an Expansion Card
1. Power down the system as described in section 6-2 and open the left side
chassis cover.
2. Remove the blank PCI shield from the rear of the chassis by removing the
thumb screw.
3. Insert the expansion card into the motherboard expansion slot while aligning
the expansion card bracket with the opening in the rear of the chassis.
4. Secure the expansion card bracket to the rear of the chassis with the thumb
screw.
5. Replace the chassis side cover and power up the system.
6-8 Power Supply
The 5038AD-I system comes with a 750 Watt power supply. Mount it on the rear
fl oor of the chassis. The power supply fan may be on top (recommended) or under
the power supply.