9
Chapter 1: Introduction
1.3 System Features
The following table is an overview of the main features of the SYS-1029U-T Series server.
System Features
Motherboard
X11DPU
Chassis
SC119UAC2-R751-T Rev.C
CPU
Dual Intel Xeon 82xx/62xx/52xx/42xx/32xx or 81xx/61xx/51xx/41xx/31xx processors (in Socket P (LGA3647))
(Intel Xeon Processor Scalable Family). For the latest CPU/memory updates, refer to our website at
http://www.supermicro.com/products/motherboard/Xeon/C620/X11DPU.cfm
.
Memory
Twenty-four slots for up to 6 TB of 3DS Load Reduced DIMM (3DS LRDIMM), 3DS Registered DIMM (3DS
RDIMM), or up to 3TB of Load Reduced DIMM (LRDIMM) with speeds of up to 2933 MHz; support for Non-
Volatile DIMM (NVDIMM) and Intel Optane DC Persistent Memory (DCPMM)
Chipset
Intel C621
Expansion Slots
Two full height, full width PCI-E slots, one low profile PCI-E slot, one internal low profile PCI-E x8 slot (Ultra
riser)
Storage Drives
Ten hot-swap 2.5" bays for SATA3 HDDs; two can be NVMe SSDs; eight support SAS with an optional add-on
card
(Optional)
M.2: Up to two PCI-E M.2 or one SATA3 M.2
Power
750 W redundant 80Plus Platinum level modules
Cooling
Eight 4-cm counter-rotating fans, two CPU heatsinks, two air shrouds to direct air flow
Input/Output
USB 3.0: Two ports on the rear I/O panel (USB 0/1); two ports on the chassis front (USB 3/4)
One serial port; one VGA port
LAN ports
Two to four, depending on the Utra riser card model; see previous page for details
One dedicated BMC port
Form Factor
1U rackmount; (WxHxD) 17.2 x 1.7 x 27.8 in. (437 x 43 x 707 mm)
