8
Assemble the SuperMax Tools 19-38 drum sander
Open Stand #71938-OP or alternatively, if you have
chosen to use your own bench prepare the existing
bench for the sander attachment.
NOTE: See Open Stand #71938-OP manual included in the
Open Stand shipping box for stand set-up and directions.
Open box 1 that contains the main sanding unit. Re-
move the cardboard liner. Open the plastic bag enclo-
sing the sanding unit.
NOTE: There will be a small container of hardware included
with your sander. This container will include everything you
need to set up your sander (see above).
Remove the two wooden packing plates from bottom of
the sanding unit using the enclosed wrench and keep
wrench for future adjustments.
NOTE: These bolts that you just removed from the packing
plates will work as your bolts for attaching the sander or as
extra bolts for future replacement.
5
Cut each corner of BOX 1 to fold sides flat, providing
access to sanding unit.
3
1
2
5
With one or two helpers, place the sanding unit on
stand or bench (lift points marked).
4
