Chapter 4 Award BIOS Setup
Page: 4-18
PPC-360 USER
c
S MANUAL
4-7. POWER MANAGEMENT SETUP
Choose
ň
POWER MANAGEMENT SETUP
ʼn
option on the main menu, a
display will be shown on screen as below :
Phoenix - AwardBIOS CMOS Setup Utility
Power Management Setup
Item Help
ACPI Function
Ź
Power Management
PM Control by APM
Video Off Option
Video Off Method
MODEM Use IRQ
Soft-Off by PWRBTN
State After Power Failure
Ź
Wake Up Events
[Enabled]
[Press Enter]
[Yes]
[Suspend -> Off]
[V/H SYNC+Blank]
[3]
[Instant - Off]
[Off]
[Press Enter]
Menu Level
Ź
npom
:Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Power Management Setup Screen
The “Power Management Setup” allows the user to configure the system to
the most effectively save energy while operating in a manner consistent with
your own style of computer use.
ACPI FUNCTION:
Users are allowed to enable or disable the Advanced Configuration and
Power Management (ACPI).
POWER MANAGEMENT:
This item allows you to select the Power Management mode.
PM CONTROL BY APM:
When enabled, an Advanced Power Management device will be activated to
enhance the Max. Power Saving mode and stop the CPU internal clock. If
Advance Power Management (APM) is installed on your system, selecting
Yes gives better power savings. If the Max. Power Saving is not enabled, this
will be preset to
No
.
Summary of Contents for PPC-360
