Superior SOLANGE, Installer'S Instructions

Page: 6 / 28

GENERAL INFORMATION
• This instruction booklet has been prepared by the manufacturer and is
an integral part of the product. In the event of sale or relocation of the
product make sure this booklet accompanies it, since the information
contained in it is addressed to the purchaser and to anyone involved
in the installation, use and maintenance of the product.
• Read the instructions and the information, supplied in all forms
together with the product and any accessories, as well as the
documentation referred to in this manual carefully, before proceeding
with installation, use or any repairs.
• The manufacturer cannot be held liable for situations of risk, defects,
damage, product malfunctioning or for damage to objects, people
or animals resulting from tampering of the appliance and use
and installation which do not respect the indications provided by
regulations and the manufacturer.
• Any changes to the original parameters which determine product
operation may only be carried out by authorised persons from the
company and with the values set by the manufacturer. Non-authorised
interventions on the product will be considered tampering.
d It is forbidden any unauthorized modification of the appliance.
a
Product installation, use and maintenance must be carried
out in compliance with the applicable instructions provided
by the manufacturer and in compliance with all relevant
regulations. Failure to respect the indications supplied and
incorrect interventions may cause situations of risk, health
related problems or product faults.
Product installation and maintenance must be carried out
exclusively by qualified personnel with sufficient knowledge
of the product itself.
All cleaning and maintenance work is to be carried out when
the fire is out, the appliance is cold and with the power cable of
the product itself and/or any other accessories disconnected.
a At the end of installation, cleaning and maintenance
operations:
- restore and replace all worn or damaged parts with original
spare parts
- restore all initial connections together with the normal
operating conditions of the appliance and the system
- carry out a start-up and operating test to check that there
are no faults.
See the guarantee certificate enclosed with the product for the terms,
limitations and exclusions..
In line with its policy of constant product improvement and renewal, the
manufacturer may make changes without notice.
This document is the property of the manufacturer; no part of it
may be disclosed to third parties without the written permission of
the manufacturer. All rights reserved by the manufacturer.
EXAMPLE OF FLEXIBLE PIPE CONNECTION
The hot air ducting set allows the flow of hot air from the appliance to
be directed into other rooms.
Below are some examples of hot air ducting.
In order to create some of the solutions proposed, the installer needs
not only the flexible duct of a suitable diameter but also vents for the air
outlets and the Y elements, neither of which are provided but may be
purchased separately.
Do not exceed the maximum total flexible pipe length calculated
according to the appliance:
Appliance Ducting maximum length
SOLANGE Ø 7,5 cm 5 m
The maximum total length:
- is to be reduced by 1 metre for each elbow connector and/or Y
connector used
- is given by the sum of the individual lengths of pipes for each fan
- is subject to a check of the dimensions and the insulation classification
of the environment to be heated and the ducting method.
The flexible pipe can be curved and slightly deformed but it must not
have any narrow sections or be blocked: this would compromise the hot
air flow and appliance safety.
a
The outlets must not be closed in order to avoid overheating.
The outlet must always be kept open and free of clogs in cases
where there is only one rear outlet from the fan. The flexible
pipe must always be insulated to avoid heat dispersion and
provide sound cladding for the air flow.
Key
C Hot air outlet in other directions
D Y element (for flexible pipe)
E
Bend
SOLUTION 1.
DT2035022-0
C
English
6 DT2002837_H07033360_02