background image

5  

 
On completion of the installation and commissioning ensure that the operating instructions for the stove are 
left with the customer. Ensure to advise the customer on the correct use of the appliance. Advise the correct 
pellet fuel to be used on the stove and warn them to use only the recommended fuels for the stove. It is    
important that the fuel is stored in a dry place, particularly once a bag is opened. If bulk fuel storage is used 
expert advice should be sought. 
 
Advise the user what to do should smoke or fumes be emitted from the stove. The customer should be 
warned to use a fireguard to BS 8423:2002 in the presence of children, aged and/or infirm persons. 

 

 

SUPPLEMENTARY OPERATING INSTRUCTIONS FOR THE UK MARKET 

TO BE READ IN CONJUNCTION WITH THOSE IN THE INSTRUCTION BOOKLET 

 

 

 

WARNING NOTE 

 

Properly installed, operated and maintained this stove will not emit fumes into the dwelling.  Fume emission 
is potentially dangerous and must not be tolerated. In the event of fume emission from the appliance, then 
the following immediate action should be taken: 

 

(a)  Switch off the stove immediately 
(b)  Open doors and windows to ventilate room and then leave the premises 
(c)  When safe to do so, check for flue or chimney blockage and clean if required 
(d)  Do not attempt to relight the stove until the cause of the fume emission has been identified and corrected.  

If necessary seek expert advice.

 

 
The most common cause of fume emission is flueway or chimney blockage. For your own safety these must 
be kept clean at all times. 

 

 

IMPORTANT NOTES 

General 

Before lighting the stove check with the installer that the installation work and commissioning checks        
described in the installation instructions have been carried out correctly and that the chimney is clean, sound 
and free from any obstructions. As part of the stoves’ commissioning and handover the installer should have 
shown you how to operate the stove correctly. 
 

CO Alarm

  

Your installer should have fitted a CO alarm in the same room as the appliance. If the alarm sounds          
unexpectedly, follow the instructions given under “Warning Note” above. 
 

Use of fireguard 

When using the stove in situations where children, aged and/or infirm persons are present a fireguard must 
be used to prevent accidental contact with the stove.  The fireguard should be manufactured in accordance 
with BS 8423:2002. 
 
 
 
 
 

READ THE INSTRUCTION BOOKLET AND THESE INSTRUCTIONS CAREFULLY    

BEFORE USING THE STOVE

 

Summary of Contents for SABRINA THERMO 11





























































Reviews: