FRANÇAIS
ENGLISH
3
clearing a jammed fastener, leaving the work area,
moving the tool to another location, or handing the
tool to another person.
EXTENSION CORDS:
Observe warnings that
accompany air compressors concerning the use
of the correct gauge and insulation on extension
cords used out of doors.
NEVER USE A TOOL
that is leaking air, has
missing or damaged parts, or requires repair.
Make sure all screws and caps are securely
tightened.
CHECK FOR DAMAGED PARTS.
Never use
a tool if safety, trigger, or spring are inoperable,
missing or damaged. Do not alter or remove
safety, trigger, or springs. Make daily inspections
for the free movement of trigger and safety
mechanism.
REPLACEMENT PARTS:
When servicing, use
only identical Superior replacement parts and
fasteners recommended by us.
CONNECT TOOL TO AIR SUPPLY BEFORE
loading fasteners to prevent fasteners from
firing during connection. The fastener driving
mechanism may cycle when the tool is connected
to the air supply.
ALWAYS ASSUME THE TOOL CONTAINS
FASTENERS.
Keep it pointed away from yourself
and others at all times. No horseplay. Respect the
tool as a working implement.
DO NOT LOAD FASTENERS
with the hammer
face depressed. The tool may unintentionally fire a
fastener.
DO NOT DEPRESS THE HAMMER FACE
when
not driving fasteners. Never carry tool while
touching on the hammer face trigger mechanism:
tool may fire an unwanted fastener.
DON’T OVERREACH.
Keep proper footing and
balance at all times. Do not reach over or across
machines which are running.
GRIP TOOL FIRMLY
to maintain control while
allowing the tool to recoil away from the work
surface as the fastener is driven.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
IMPORTANT SAFETY INSTRUCTIONS
