20
S
uperior
B
roadcast
P
roducts
Blue Digital Exciter
User Manual
16 / 44
User Manual
Rev. 1.0 - 20/11/09
DTVC
This menu provides the setting on exciter.
Note:
to access in this menu please read the note in chap 6.2.2
Frequency
Power
Precorrection
Ï
Figure 6.18
Rotating the encoder clockwise to pass to next settings.
Press the encoder to access the editing of single parameters.
In the current menu is displayed the power measured as percentage and in W.
( On ) Power : 50% 9.9W
Ï
Esc Ok
Figure 6.19
( ON )
Enables (On) or disables (Off) the power supply of the exciter.
POWER
Selection of the output power percentage desired. In case which
the percentage is set at 0%, the power turns off (output power
disabled) and the
RF
led lit off. When the percentage is set at
another value, the power turns on, the
RF
led lit on and the ramp
starts for leading the selected value.
Note:
pushing the encoder button after the selection the value is con
rmed, it
will be save directly on
ash memory (do not need to select OK from the same
menu).
6.2.14 Precorrection (
SET
menu)
This menu provides the setting on exciter.
Note:
to access in this menu please read the note in chap 6.2.2
Frequency
Power
Precorrection
Ï
Figure 6.20
Rotating the encoder clockwise to pass to next settings.
Press the encoder to access the editing of single parameters.
In the current menu you can choose between No-Linear and Linear:
