Operation
900079-02 05/2015
Innovative Hearth Products
Superior™ DRL3000 Linear Direct-Vent Gas Fireplaces
63
OPTIONAL ACCESSORY COMPONENTS
Surround Kits
Surround kits should be used for a finished appearance.
Table 33: Surround Kits
Catalog No.
Model No.
Description
F2261
LDV42-SB
Black Satin, 42” models
F2263
LDV42-SS
Stainless Steel, 42” models
F2260
LDV54-SB
Black Satin, 54” models
F2262
LDV54-SS
Stainless Steel, 54” models
Forced Air Kits
The FBK-200 blower provides constant velocity forced air circulation. If installed the FBK-200 blower variable speed
control switch must be wall mounted.
Table 34: Forced Air Kits
Catalog
Model
Description
80L85
FBK-200
Blower, Standard (variable speed)
Touch-Up Paint Kit
Repair of minor scratches and discoloration of the fireplace black painted surfaces may be accomplished with the
touch-up paint kit.
Table 35: Touch-Up Paint Kit
Catalog No.
Model No.
90L73
FTPK-B
Termination Guard Kits
The vent termination guards may be used to cover the vent termination on the exterior of the home to minimize
exposure to the hot surface of the termination.
Table 36: Termination Guard Kits
Square
Termination
Guard
(fits 94L10
and H1968)
Deluxe
Termination
Guard
(fits 94L10
and H1968)
Termination
Shroud
(fits H1968)
Catalog
Model
Description
H5820
4.5HTSK
Termination Shroud
87L02
SV4.5HGS
Termination Guard, Deluxe
17M52
SV4.5HGS-1
Termination Guard, Square
Glass Media Kits
Table 37: Glass Media
Catalog
Model
Description
H8412
CRSHGL-RBLK
Bag of Glass Media, Reflective Black
H8424
CRSHGL-RBLU
Bag of Glass Media, Reflective Blue
H8413
CRSHGL-P
Bag of Glass Media, Platinum
H8538
CRSHGL-GF
Bag of Glass Media, Goldfinger
H8539
CRSHGL-C
Bag of Glass Media, Copper
LIGHTING INSTRUCTIONS
6-3/4"
9-5/8"
1. Slide the switch on the receiver, wall switch or ON/OFF switch to "OFF.
2. (if applicable) Press ON/OFF button on remote control transmitter to
"OFF."
P/N 900337-00, Rev. 0
DRAFT
FOR YOUR SAFETY READ BEFORE OPERATING
WARNING: If you do not follow these instructions exactly, a fire or explosion may result causing property damage, personal
injury or loss of life.
A. This appliance is equipped with an ignition device which automatically lights
the pilot. Do not try to light the pilot by hand.
B. BEFORE OPERATING smell all around the appliance area for gas. Be sure to
smell next to the floor because some gas is heavier than air and will settle
on the floor.
WHAT TO DO IF YOU SMELL GAS:
• Do not try to light any appliance.
• Do not touch any electric switch; do not use any phone in your building.
OPERATING INSTRUCTIONS
TO TURN OFF GAS TO APPLIANCE
• Immediately call your gas supplier from a neighbor’s phone. Follow the gas
supplier’s instructions.
• If you cannot reach your gas supplier, call the fire department.
C. If any portion of this appliance does not operate as the instructions indicate,
do not try to repair it, call a qualified service technician. Do not use tools.
Force or attempted repair may result in a fire or explosion.
D. Do not use this appliance if any part has been under water. Immediately call
a qualified service technician to inspect the appliance and to replace any
part of the control system and any gas control which has been under water.
Electronic Gas Control
Valve - SIT
Electronic Pilot Assembly
3. Turn off all electric power to the appliance if service is to be performed.
Note: The control may have a battery backup (remove batteries, if
installed).
4. Close the main line gas shut-off valve.
1. STOP! Read the safety information above on this label.
2. Read the Care and Operation manual including the section on "Remote Control
System," (if applicable).
3. Slide the switch on the receiver, wall switch or ON/OFF switch to "OFF."
4. Turn "OFF" all electric power to the appliance. Note: The control may have a
battery backup (remove batteries, if installed).
5. This appliance is equipped with an ignition device which automatically lights the
pilot. Do not try to light the pilot by hand.
6. Wait five (5) minutes to clear out any gas. Then smell for gas, including near the
floor. If you smell gas, STOP! Follow “B” in the safety information above on this
label. If you don’t smell gas, go to the next step.
7. Turn on all electric power to the appliance. Note: The control may have a battery
backup (install batteries, if applicable).
8. Slide the switch on the receiver to REMOTE or ON/OFF switch /wall switch to ON.
9. (if applicable) Press ON/OFF button on remote control transmitter to "ON."
10. (if applicable) Set thermostat on remote control to desired setting.
11. If the appliance will not operate, follow the instructions "To Turn Off Gas To
Appliance" and call your service technician or gas supplier.
DANGER
HOT GLASS
WILL
CAUSE BURNS.
DO NOT TOUCH
GLASS
UNTIL COOLED.
NEVER
ALLOW
CHILDREN
TO TOUCH GLASS.
A barrier designed to reduce the risk of burns from the hot viewing glass is provided with this
appliance and shall be installed for the protection of children and other at-risk individuals.
