11
11
PREPARING FOR USE/ USING THE ATTACHMENTS
ATTENTION:
Prior to assembly or disassembly of accessories, please turn the device off and pull the power plug.
• To connect the vacuum hose, insert the connection nozzle into the vacuum opening of the device.
Please be sure that the connection nozzle snaps into place.
• To withdraw the hose again, press the two buttons on the connection and pull the hose back out of
the hose outlet.
• Connect the vacuum tube to the end of the curved handhold of the vacuum hose.
• The length of the extendible hose can be variably adjusted via the locking switch at the end of the
hose. By sliding the switch downward, the lock is disengaged and the hose can be lengthened or
shortened as required. Be careful to ensure that the hose is secured firmly in place when at the
desired length.
• The device is supplied with various nozzle accessories (crevice nozzle, upholstery nozzle and
floor nozzle with a pedal button to extend or withdraw the brushes). As required, these can be
switched by simply pulling or attaching to the end of the suction hose.
• For the storage of the crevice and upholstery nozzles, a mounting attachment is included with
the flexible grab handle (11). To remove the accessories, unclip the desired nozzle from the
attachment.
• The brushes of the floor nozzle can be extended or withdrawn using the pedal button (for carpets
or flat surfaces).
(13) Dust bag full indicator
(14) Device lid
(15) Crevice nozzle
(16) Upholstery nozzle
(17) Fresh air exhaust HEPA Filter
(18) Engine filter
(19) Dust bag / Dust bag holder
14
13
6
7
8
17
18
19
11
16
15
16
