SuperiorFireplaces.us.com
126745-01E
14
FIREPLACE INSTALLATION
Continued
GRATE PLACEMENT
The grate must be placed in the burner pan so that the back grate fingers
(BRT2332TMN/BRT2532TMN) or pins (BRT2032TMN) fit into the
notches on back of burner pan and front legs fit inside burner pan as
shown in Figure 18.
Figure 18 - Placing Grate into Burner Pan
BRT2032TMN
(Back)
BRT2332TMN/
BRT2532TMN
(Back)
Pins
Notches
Pins
Back Grate Fingers
Burner Pan
Front
Leg
Notches
Burner Pan
Front
Leg
Back Grate
Fingers
EMBER AND PAN MATERIAL PLACEMENT
1. Open the bag(s) of vermiculite and fill the entire burner pan
until the burner tube is completely covered (see Figure 19).
2. Smooth the pan material just even with edges of the burner pan.
3. Remove the ember material from the bag and flatten small
amounts into quarter size pieces and lay on top of the surface of
the pan material (see Figure 20).
4. Place just enough to cover the entire surface and leave about a
1/2" gap under the lower grate members to allow air to flow (see
Figure 21).
LOG PLACEMENT FOR BRT2032TMN MODEL
1. Place front log onto front of grate sliding log all the way forward
against grate fingers (see Figure 22).
2. Insert pegs on bottom of rear log into holes in rear of grate (see
Figure 22).
3. Place top right log into notches on left side of front and rear (see
Figure 23, Page 15).
4. Place top left log into notches on right side of front and rear (see
Figure 23, Page 15).
NOTICE: Do not put volcanic stone inside the burner pan or
around the air mixer fitting. Placing volcanic stone inside
the burner pan or blocking the openings of the propane/
LP air-mixer could cause performance problems.
Figure 19 - Fill Entire Burner Pan with Vermiculite
(BRT2332TMN/BRT2532TMN Models Shown)
Vermiculite
(Pan Material)
Burner Pan
Grate
Figure 20 - Ember Material on Surface of Pan Material
(Vermiculite) (BRT2332TMN/BRT2532TMN Models Shown)
Figure 21 - Pan and Ember Material Clearances (BRT2332TMN/
BRT2532TMN Models Shown)
Ember Material
Burner Pan
Vermiculite (Pan Material)
Grate
Figure 22 - Installing Front and Rear Logs
Front Log
Rear Log
0.5"
0.5"
Grate
Burner Pan
Pan and Ember Material
