Series AA250
Page 10
LT252 Oct 2019
INTERIOR AND EXTERIOR MOUNTING
The heater can be mounted indoors, hung on a chain setup or mounted to the wall of the enclosure internally or
externally.
Hanging Instructions
Four (4) eyebolts are supplied with the heater. Fasten them to the retainer nuts on the top of the enclosure. Only
use chain rated for lifting and must be attached to all four (4) eyebolts. Assemble eyebolts and chain according to
the figure below. Only use chain rated for lifting and must be connected on all four eyebolts. All chain fittings used
must have closed ends. Chains may be connected to a singular link or individually attached to the ceiling structure.
Figure 5 - Heater mounted with chain setup – four chains to connecting link
Verify that the heater is securely fastened and is hanging level (crosswise and lengthwise)
Chain
Connecting
link
Carabiner
Eyebolt
