5
•
Once the water has boiled, the device switches off automatically. The
On / Off
switch (5) springs back to
0
and the
power light (3)is extinguished.
•
Wait a moment after the water boils until the water stops bubbling.
•
The boiling process is immediately interrupted / finished when the
water tank (7) is
lifted from the
base station (6). The device then switches off.
•
The water kettle is equipped with overheat protection which interrupts operation
if the device is accidentally switched on without water. In this case, the device must
cool down for at least 15 minutes before filling with water and the device can be
put back into operation.
CLEANING AND CARE
GENERAL
ATTENTION:
Always pull the plug from the power outlet before cleaning and allow the device to
cool off completely!
•
The
water tank (7), the base station (6) and the plug must not be immersed in
water for cleaning.
•
The
base station (6), the power cord and the plug must be cleaned with a dry
cloth only.
•
The
water tank (7) can be wiped off or wiped clean with a damp cloth and then
carefully dried off.
•
Do not use any aggressive cleansers, steel brushes or other hard objects which
could scratch the surfaces.
•
There is a filter in the
spout (1) which can be removed and cleaned under
running water.
Caution:
Let the device cool off completely before removing the filter!
REMOVING / INSERTING THE FILTER
•
Open the
lid (2) of the water tank (7) and pull the filter out upwards.
•
Clean the filter under running water.
•
Insert the filter again after cleaning. Make sure that the filter is sitting straight
in the holder and is not inserted at an angle.
DESCALING
10002104_EB0068980_WK-9931_IM_v02a_A120611_30-11-2012_GB.indd 5
10/12/2012 10:11 AM
