Series
THE
Page
22 LT194
Feb
2017
15. Install the reflector seal with the flanges facing
inwards (secure with screws to reflectors and U-
tube reflector).
4 x Self-drilling screw #8-18-1/2”
16. Install the U-tube reflector (overlap by 4” (100 mm),
secure with screw to the reflectors and the reflector
seal, 4 screws).
4 x Self-drilling screw #8-18-1/2”
17. Install the U-tube.
18. Tighten clamping bolts of both couplers. When
installing, orient band clamp lock bolts to top, at 10
o'clock or 2 o'clock position. Be sure not to over
torque the coupling.
Torque coupling to 15-25 lbf-ft (20-40 Nm).
Nut size 3/8”