Series
THE
Page
21 LT194
Feb
2017
10. Locate and insert baffles at the opposite ends of
the tubes to the burner:
a. 6’ ( 183 cm) stainless steel on the 2nd tube
b. 2 x 6’ (183 cm) baffles on the 3rd tube
Baffles inserted at the opposite ends of the tubes
to the burner.
11. Install couplers. When installing, orient band
clamp lock bolts to top, at 10 o'clock or 2 o'clock
position.
12. Lock both baffles together before insert. Place
the baffle tabs at a 90° angle to the baffle
keyhole. Insert baffle tabs in the keyhole. Rotate
the baffle 90° to lock the baffle sections together.
13. Baffle tab bended over end of tube at 6 o'clock
position.
Reflectors assembly
14. Install reflectors.
Slide reflectors through the hanging brackets until
they are all roughly in position along the heater.
Referring to the assembly diagram locate
reflectors 3” (75 mm) from tube flanges and
overlap by 4” (100 mm).