SuperiorFireplaces.us.com
126601-01_J
26
TECHNICAL SERVICE
You may have further questions about installation, operation, or
troubleshooting. Please contact your IHP dealer for any questions
or concerns a. When contacting your dealer please have your model
and serial numbers of your fireplace ready. You can also visit our web
site at SuperiorFireplaces.us.com.
REPLACEMENT PARTS
See Pages 20 to 23 for a complete replacement parts list. Use only
parts supplied from the manufacturer.
Normally, all parts should be ordered through your IHP distributor
or dealer. Parts will be shipped at prevailing prices at time of order.
When ordering repair parts, always give the following information:
1. The model number of the fireplace.
2. The serial number of the fireplace.
3. The part number.
4. The description of the part.
5. The quantity required.
6. The installation date of the fireplace.
If you encounter any problems or have any questions concerning the
installation or application of this fireplace, please contact your dealer.
IHP
1769 East Lawrence Street
Russellville, AL 35654
Visit us at SuperiorFireplaces.us.com
IMPORTANT NOTICE
A manufactured shroud which has been approved by a
national testing agency for use with this fireplace may
be used if installed in accordance with the instructions
by its manufacturer. A locally fabricated shroud may be
used with IHP Shroud Leg Spacer Kit (SLK) in accor-
dance with instructions provided with the shroud.
NOTICE: The firebox canopy (hood) must not be mod-
ified or replaced with a canopy that may be provided
with the unvented decorative room heater.
CAUTION: THE STRUCTURAL INTEGRITY OF THE
MANUFACTURED HOME FLOOR, WALL, AND CEIL-
ING/ROOF MUST BE MAINTAINED.
WARNING: DO NOT INSTALL IN SLEEPING ROOM
OF MOBILE HOMES.
Canadian code CAN/ULC-S610-M87 and other pertinent codes require stain-
less steel chimney for the installation of this fireplace. A Cold Air Climate Kit is
also required in Canada and is recommended for cooler regions in the United
States. Below, find a list of approved stainless steel parts.
Chimney Parts List for Canada
Catalog
No.
Model
No.
12" Hi-Temp
Wood-burning Chimney
F0953
12-12HT
12" Section Double Wall Pipe
F0954
18-12HT
18" Section Double Wall Pipe
F0955
24-12HT
24" Section Double Wall Pipe
F0956
36-12HT
36" Section Double Wall Pipe
F0957
48-12HT*
48" Section Double Wall Pipe
F0958
30E-12HT
30" Offset and Return
F0959
12S-12HT
Chimney Support
F0960
RLT-12HT* Round Top w/ Louvers
F0961
AP-12HT
Anchor Plate/Collar Assembly (Masonry Fireplaces)
F0951
CAK-12
Cold Air Collar Kit
*When ordered alone, this part cannot ship via parcel delivery services.
IMPORTANT NOTICES - CANADA
