SuperiorFireplaces.us.com
900719-00B
4
SAFETY
Continued
• immediately call your gas supplier from
a neighbor’s phone. Follow the gas sup-
plier’s instructions
• if you cannot reach your gas supplier,
call the
fi
re department
4. This
fi
replace shall not be installed in a
bedroom or bathroom.
5. Do not use this
fi
replace as a wood-burn-
ing
fi
replace. Use only the logs provided
with the
fi
replace.
6. Do not add extra logs or ornaments such
as pine cones, vermiculite, or glowing
embers. Using these added items can
cause sooting. Do not add volcanic stone
around base. Volcanic Stone and debris
could fall into the control area of
fi
replace.
7. This
fi
replace is designed to be smoke-
less. If logs ever appear to smoke, turn
off
fi
replace and call a quali
fi
ed service
person.
NOTE: During initial operation, slight
smoking could occur due to log curing and
fi replace burning manufacturing residues.
8. To prevent the creation of soot, follow the
instructions in
Cleaning and Maintenance
,
Page 23
.
9. Before using furniture polish, wax, carpet
cleaner, or similar products, turn heater
off. If heated, the vapors from these prod-
ucts may create a white powder residue
within burner box or on adjacent walls or
furniture.
10. This
fi
replace needs fresh air ventilation to
run properly. This
fi
replace has an Oxygen
Depletion Sensing (ODS) safety shutoff
Figure 1 - Log Base Assembly
PRODUCT IDENTIFICATION
Log Set
Base
Assembly
Front
Burner
Remote
Control
Figure 2 - Fireplace
Con
t.
S M
T W
T F
S
AM
PM
RO
OM
SET
P1
A
P1
P2
P2
Pilot
:
ON THE
RMO OFF
°
u
°
PRO
GRAM
MO
DE/SET
Top Outer Casing
Top panel
Assembly
Fireplace
Hood
Bottom Panel
Assembly
Screen
Assembly
Magnet
Left Side
Right
Side
Front
system. The ODS shuts down the
fi
replace
if not enough fresh air is available.
See
Air for Combustion and Ventilation
,
Page 6
. If
fi
replace keeps shutting off, see
Troubleshooting
,
Page 24
.
11. Do not run
fi
replace
• where
fl
ammable liquids or vapors are
used or stored.
• under dusty conditions.
12. Do not use this
fi
replace to cook food or
burn paper or other objects.
13. Do not use
fi
replace if any part has been
under water. Immediately call a quali
fi
ed
service technician to inspect the room
fi
replace and to replace any part of the
control system and any gas control which
has been under water.
14. Turn off and unplug fireplace and let
cool before servicing. Only a quali
fi
ed
service person should service and repair
fi
replace.
15. Operating
fi
replace above elevations of
4,500 feet could cause pilot outage.
16. Do not operate fireplace if any log is
broken. Do not operate
fi
replace if a log
is chipped (dime-sized or larger).
17. To prevent performance problems, do not
use propane/LP fuel tank of less than 100
lbs. capacity (propane/LP only).
18. Provide adequate clearances around air
openings.
19. The screen or any other part removed
for servicing must be replaced prior to
operating this heater.
