126816-01F
27
SuperiorFireplaces.us.com
OPERATION
Continued
Figure 53 - Control Knob, Igniter Button and
Remote Selector Switch
Selector
Switch
Control Knob
in OFF Position
Flame
Adjustment
Knob
Igniter
After lighting, let pilot fl ame burn for about one
minute. Turn control knob to ON position. Adjust
fl ame adjustment knob anywhere between HI and
LO. Slide the selector switch to the REMOTE posi-
tion
(see
Figure 53
)
.
NOTE
: The burner may light if hand-held remote
was on when selector switch was last turned off.
You can now turn burner on and off with hand-held
remote control unit.
IMPORTANT
:
Do not leave selector switch in the
REMOTE or ON position when pilot is not lit. This
will drain the battery.
NOTE
: Do not hold hand-held remote for a long
time. Body temperature will affect its operation in
the AUTO mode.
INSPECTING BURNERS
Check pilot fl ame pattern and burner fl ame pat-
terns often.
PILOT FLAME PATTERN
Figure 54
shows a correct pilot fl ame pattern.
Figure 55
shows an incorrect pilot fl ame pattern.
The incorrect pilot fl ame is not touching the ther-
mocouple. This will cause the thermocouple to
cool. When the thermocouple cools, the appliance
will shut down.
If pilot fl ame pattern is incorrect, as shown in
Figure 55.
• turn appliance off (see To Turn Off Gas to Appli-
ance,
Page 26
• see
Troubleshooting,
Page 29
NOTE
: The pilot fl ame on natural gas units will have
a slight curve, but fl ame should be blue and have
no yellow or orange color.
Figure 54 - Correct Pilot Flame Pattern
Figure 55 - Incorrect Pilot Flame Pattern
Pilot Burner
Thermocouple
Thermocouple
Pilot Burner
OPTIONAL HAND-HELD
REMOTE OPERATION
NOTE
: All remote control accessories must be
purchased separately (see Accessories,
Pages
34-35
). Follow instructions included with the
remote control.
NOTICE: You must light the pilot before
using the hand-held remote control
unit. See
Lighting Instructions
on
Page 25
.
