Operation
901032-00B, 07/2020
Innovative Hearth Products
DRT4000-C & DRT4200-C Series Direct-Vent Gas Fireplaces
61
Installing the DRT4200-C & DRT4000-C series 40” and 45” logs
The logs have notches/tabs to assist proper positioning. Upper logs rest on lower logs via notches/tabs. Proper log
placement is critical to prevent sooting. Place the logs in the gaps between flame peaks, so they do not impinge the
flames. Follow the log placement instructions precisely.
NOTE:
Do not cover the burner ports.
Log Number
Description
1
Bottom Rear Log
2
Upper Left Rear Log
3
Upper Right Rear Log
4
Middle Left Log
5
Front Left Forked Log
6
Front Right Forked Log
7
Upper Right Forked Log
1.
If necessary, remove the glass door
(
Page 63
)
.
2.
Position the rear log #1
(
Figure 44
)
on the two rear setting pins shown in
Figure 43
.
Figure 43 - Locate log setting pins
Figure 44 - Place log #1
3.
Place the left rear log #2
(
Figure 45
)
over the 2 left pins on log #1
(
Figure 44
)
.
4.
Place the upper right rear log #3
(
Figure 46
)
over the 2 right pins on log #1
(
Figure 44
)
.
Figure 45 - Place log #2
Figure 46 - Place log #3
Table 30 - 40” and 45” Log Sets
1
2
3
5
6
7
4
Catalog number for the entire set:
J8301 - 40”; J8303 - 45”
The setting pins, indicated by the arrows, are for the middle and rear log.
1
Grate
2
3
