6
• If the aquarium water does not start flowing, check if the filter pot is filled with water and repeat filling the hose
with aquarium water, check all connections to make sure that they are securely fastened.
• The pump will initially make some noise (air resonance). The air will be out of the system after approx 24 hours.
Maintenance
• Clean filter 1 x per month or as soon as there is a significant flow decrease indicating that the filter needs cleaning.
• Turn of the filter by unplugging it from the power socket.
• Close the valve on the inlet-connector, disconnect the filter for cleaning.
• Never use chemicals for cleaning, make sure buckets, tools and sponges are free of chemicals.
• Open the filter and clean foam sponges, replace sponges every 2-3 months.
• Only rinse biological filter media when needed, because cleaning will destroy the bacteria life.
• When cleaning the filter inspect the rubber seal ring and clean it. Use a silicone based lubricant on rubber seal ring
before re-installation.
• Make sure that the top rim of the canister is clean and free of any debris before re-installing the filter cover.
Fig. G
Also check the operation of the rotor, especially if it makes a noise.
• Loosen the locknut on the pump and carefully pull the pump off the filter.
• Take out the rotor. Rinse the pump clean. Clean the rotor and check for damage (A new rotor is available from your
dealer).
• Replace the rotor and put the pump back in place and tighten the locknut.
• Rotor wear is normal and not covered under warranty.
Recycling
This symbol indicates that this product (if it is discarded) may not be disposed of with normal household waste.
Instead it must be handed in at an official collection centre (e.g. HWRC). Or can be returned to the dealer when
purchasing a similar new product. Follow the applicable rules in your country for the separate collection of
electrical and electronic products. Separate collection and recycling are better for the environment, public health
and reduces waste.
Warranty
2 years manufacturer’s warranty on materials and construction defects. Devices must be returned complete with
all components, accompanied with an official proof of purchase confirming a purchase date for any warranty
claims. Incomplete devices of which parts are missing, and devices without proof of purchase are not eligible for
warranty. After receiving and checking, we will determine whether the device will be repaired or replaced. For a
device repaired or replaced under warranty, the remaining time of the original warranty period applies.
Carefully read the instructions on installation, use and maintenance. Damage due to incorrect use, damage due
to immersion in water, damage due to contamination or not cleaning the device, wear and damage to the rotor
and damage to the cord are not covered by the warranty.
Always keep the proof of purchase, without proof of purchase the warranty will be void!
