CONTROL PANEL
1. Illustration of control panel.
⑴
Power switch and “SENS” control
：
The sensitivity control is also the power switch. Rotate
counter-clockwise to turn off the power. Rotate it clockwise, away from
OFF, to turn on the power.
⑵
“DISC” control
：
Rotate counter clockwise to detect all types of metal. Rotate clockwise to
eliminate most of the junk metal. Different DISC degree is to be chosen
according to different needs.
⑶
LED & Headset
：
The LED flashes red when a target is detected, the closer to the target,
stronger the LED flashes. The LED will also flash red when the batteries
need replacing.
When LED flashes red, the headset will give out a sound of 400Hz TOO,
which indicates that the detector is approaching the target or the battery
needs replacing.
－
4
－
