FEATURES
MD 6000 metal detector is a model with superb quality and performance.
It not only has high sensitivity but also distinguishes the metal type. It
can help the user to find lost coins, gold/silver jewelry and metal objects,
which can enable the users to have fun during operation.
Motion detection has relatively low requirements on the
environment.
The Sensitivity adjustment function enables the detector to easily
adapt to different environments.
The Discrimination adjustment function enables the elimination of
unwanted metal.
Water-proof detector and headset enable the underwater
detection.
PREPARATION
1. Assembly
Remove the stem and search coil assemblies from the shipping
carton. Unscrew the knob on top of the stem 1 and remove the knob
connector. Insert the stem and align the holes on the search coil
bracket and the stem 1. Push the connector through the holes and
tighten the knob.
Then remove the control box fixed on the upper stem 2 with arm
support from the shipping carton. Insert stem 1 into this upper stem
2 by snapping two spring locks on stem 1 into the proper holes on
stem 2.
User may adjust the stem length at will. To extend the lower stem,
push in the spring lock, pull out the lower stem and let the spring
lock snap into another hole. Wind the search coil cable around the
stem, make sure there is some slack, then tighten the locknut.
－
2
－
