HK1000-DM4-E, 4WD All Terrain Enclosed Robot Platform
SuperDroid Robots, Inc
Contact
224 Technology Park Lane
(919) 557-9162
Fuquay Varina, NC 27526
Revised: June 20, 2019
Page 2 of 4
Contents
Safety ............................................................................................................................................................................ 2
Safety
The HK1000 is a large robot with a lot of power. To avoid
injury to yourself, other people, property, or the robot,
the following should be read and understood before
operation.
-
Before first use or until you are comfortable using the robot:
Elevate the robot on chocks or
boards so that the wheels are not touching the ground and power on the robot. Spin the
wheels to make sure you are familiar and comfortable with the operation.
-
Whenever a modification to the robot, or the motor controller has been made:
Elevate the
robot on chocks or boards so that the wheels are not touching the ground. Turn on the robot
and test the functionality before driving on the ground.
-
Whenever you turn on the robot and remote, you must wait for the remote to pair to the
robot. Premature stick movement will move the robot, but also set the zero point of the
robot and it will not stop moving until the robot is turned off and on again.
-
Unplugging or tampering with the encoder wires while the robot is moving will result in one
or all the wheels to drive at a high rate of speed until the encoder wire is plugged back in, or
the robot is turned off.
-
This is a large and powerful robot and should only be operated by a competent and careful
individual who has read and understands this manual.
