1.
Check that all your ordered items are included in the package.
2.
Place the robot on a level surface or on blocks so that the tracks/wheels can rotate freely.
3.
See
SECTION 5
for instructions on installing optional accessories.
4.
Insert the provided SD card into the rear of the GPK-32’s camera. It should be inserted with the metal
contact points facing up. Figure 1A shows the location of the SD card slot.
5.
Before moving forward make sure the 4
switches
at the
top
of the controller and the
left
joystick match Figure
1C. That means flip the 4 switches to the UP position and push the left joystick to the DOWN position.
6.
Power on the controller using the Power switch. Figure 1B shows the location of the power switch on the
FLYSKY controller.
7.
To turn on the video monitor, flip the switch located on the back of the monitor. Then press the power button on
the front of the monitor. See Figure 1D to see the location of this button.
8.
Power on the robot and allow it several seconds to power on. See Figure 1E for location of this switch.
9.
Before placing the robot on the ground, read through the Operations section and test the controls to make
sure the robot moves as anticipated.
4
SECTION 1 - SETUP
NOTE
The configuration you chose for your GPK-32 will determine the accessories included. Additional
accessories can be requested by contacting SuperDroid Robots.
Video Tutorials
Unpacking and Activation
The GPK-32 typically arrives in a durable travel case, complete with foam inserts for the robot and all
accessories. Take note of how everything is packed. This will help when storing or transporting your robot and
it’s accessories.
SuperDroid Robots has a series of video tutorials on the basic setup and operation of the
GPK-32 inspection robot. We recommend you watch these tutorials while unpacking and
setting up your robot!
SCAN THE QR CODE TO THE RIGHT TO WATCH OUR TUTORIAL VIDEOS. ALTERNATIVELY,
YOU CAN VISIT THE SUPERDROID ROBOTS YOUTUBE CHANNEL AND FIND OUR ‘GPK-32
INSTRUCTIONAL VIDEO MANUAL’.
Figure 1A
Figure 1B
Figure 1D
Figure 1E
To view the saved videos or pictures remove the SD card from the RunCam and insert it into a SD card reader
connected to a computer. There will be two folders, one with videos, and one with pictures.
Do not plug the RunCam camera into a computer and do not connect to the RunCam camera wirelessly. Doing
so can cause issues with the settings that allow the camera to function properly with the robot.
Video/Picture Retrieval
SD CARD - THIS
SIDE FACES UP
Figure 1C
Summary of Contents for GPK-32
Page 7: ...7 ADDITIONAL NOTES ...