If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787
1.
Plug the GFCI Protector (image a) into any 110v wall socket. With the power
strip turned OFF, plug the power strip into the GFCI Protector.
DO NOT POWER UP YOUR SUPERROOM YET!
2.
Now that everything is plugged into the power strip, lets verify some
important steps:
3.
After verifying all of the above, it’s time to turn on your SuperRoom. Turn the
power strip switch to the ON position, and the system should spring to life
before your very eyes!
1) LED Light is properly hung.
2) Watering System tube is securely fastened to the top of the Water Pump. (Hydro Only)
3) Reservoir is filled with water and Water Pump is fully submerged. (Hydro Only)
4) Air Pump is next to (NOT IN!) the reservoir. (Hydro Only)
5) Light Power Cord is plugged into Smart Plug#1.
6) Water Pump Power Cord is plugged into Smart Plug #2. (Hydro Only)
7) Power Strip is off and plugged into the GFCI Protector.
Almost Done
NOTE:
a
