LED Parking Lot/Area Light
Important: Read all instructions prior to installation.
PLLD2 Series
4400 Earth City Expy, St. Louis, MO 63045
866-590-3533 superbrightleds.com
Rev Date: V2.0 12/06/2019
5yr
User Manual
1.
Remove the center bolt to separate the flange end from the
slip-fitter end of the mount.
2.
Run wiring through the flange that attaches to the light while
sliding the flange into the light.
3.
Tighten the two bolts to secure flange to light.
4.
Route wiring through slip-fitter end, then reattach slip-fitter end
to flange end.
5.
With supply power off, connect wiring.
6. Slide mount over pole/post and tighten the four retaining bolts.
7. Once mount is secure, the center mount bolt that holds the
flange end and slip-fitter end together can be loosened to
adjust the mounting angle of the light. Retighten center bolt
when the desired angle is achieved.
1.
Detach light flange bracket from trunnion mount.
2.
Run wiring through the flange that attaches to the light while sliding
the flange into the light.
3.
Tighten the two bolts to secure flange to light.
4. Use trunnion mount to make mounting holes on wall/surface and
attach trunnion mount.
5. Route wiring through trunnion mount, then attach trunnion mount
to light flange bracket.
6.
With supply power off, connect wiring.
7. Once installation is complete, the position locking bolts can be
removed and the center trunnion bolts can be loosened to adjust
the mounting angle of the light. Reinstall the position locking bolts
and retighten center bolt when the desired angle is achieved.
Trunnion Wall/Surface Mount (PLLD2-WM) Installation
Slip-Fitter Knuckle Mount (PLLD2-SF) Installation
