WN-Winch-Guide-12000
11
Pulley/Snatch Block
Winch
Anchor point
on vehicle
Synthetic Rope
to sling/tree stap
and anchor point
GENERAL TIPS FOR SAFE OPERATION:
• Winch is at rated capacity when spooling first Synthetic Rope layer onto Winch Drum.
Overloading can damage components. For loads over 70% of rated line pull, it is
recommend to use a pulley block/snatch block to double rope line. When doubling line,
number of layers on Winch Drum is reduced and load on Synthetic Rope is reduced by
as much as 50%. Attach to frame or other load bearing component when doubling line
back to vehicle.
• To minimize battery drain and maximize power and speed of Winch, keep vehicle
engine running during winching. Battery may be drained if winch is used for a
considerable amount of time with engine off.
• Know all features before actual use. Become familiar with rigging techniques, sounds
made under various loads, way Synthetic Rope spools onto Winch Drum, etc. by
performing several test runs.
• Inspect all components, hardware, and electrical connections before each use. If
Synthetic Rope is frayed or damaged, replace immediately. Use only manufacturers
replacement rope. Replace or remove any component that appears to be damaged,
worn, or operating abnormally.
• Never connect Synthetic Rope back onto itself. Always use a snatch block, sling, or
chain of suitable strength.
• Pull only on parts of vehicle as specified by vehicle manufacturer.
• Use only attachments and/or adapters supplied by manufacturer.
• Test run Winch in (2) directions before winching.
- Never disengage Free Spooling Clutch when a load is on Winch.
CAUTION
- If Motor stalls, stop winching immediately. Electric winches
are designed for intermittent use. Do not use in constant duty
applications. Keep duration of winching pulls as short as possible: Do
not use for more than (1) minute when at or near rated load. If Motor
becomes hot to touch, stop winching immediately. Allow Motor to cool
before resuming.
CAUTION
