3
IN-PS-K-TRX4 / IN-PS-K-TRX4-001
Remove Dash Screws
Fig. 1
Remove
(Driver Side)
Fig. 1a
Disconnect Wire Harness’ from Dash
Front
Fig. 1b
(removal illustrations continue on following pages)
Removal:
Keep all stock hardware.
1. Remove Screws and Plastic Rivets from Dash. Disconnect Wire Harness’ and remove hardware from
Driver Side of Roll Cage; remove Dash. See Figs. 1 - 1c.
2. Remove hardware from Upper and Lower Shafts. See Figs. 2 - 2a.
3. Remove (4) Bolts from stock Mounting Bracket. See Fig. 3.
4. Remove Upper Shaft, Mounting Bracket, and Lower Shaft from machine. See Figs. 4 - 4a.
Remove all
Plastic Rivets
Disconnect
Fig. 1c
Connection no longer used.
Secure in a appropriate location.
