Superabrasive
User Manual Original Language
Lavina® 30GEB
1/2021
34
The Ressembly is on reverse order, and is important to match the threads of the conical sleeve and the belt
washer(Fig.8.11.13). Put the front washer (Fig.8.11.14), on the screw use always the “blue” thread locking adhesive.
Tightening force of the bolts has to be
4,5...6N.m(3,3...4,4 ft/lbs). Put carefully
the two binder screws by leaving the
central thread
free.(Fig.8.11.14)(Fig.8.11.15). Insert the
screws up to revolution and ½ by
alternating until the conical sleeve pull up
the belt pulley. The conical sleeve must
be aligned in height with the belt
washer(Fig.8.11.16).
Dismounting the planetary belt is
possible without removing of the
Bottom cover assembly. Unscrew the
eight bolts, take the service window
cover and the
sealing
(Fig.8.11.17)(Fig.8.11.18).
Dismount the planetary belt (see
8.11.)
Figure 8.11.13
Figure 8.11.14
Figure 8.11.16
Figure 8.11.15
Figure 8.11.19
Figure 8.11.18
Figure 8.11.17
Figure 8.11.10
Figure 8.11.11
Figure 8.11.12
Figure 8.11.7
Figure 8.11.8
Figure 8.11.9
