Superabrasive User Manual Original Language Lavina®13G-E
2/2019
20
7.4 TENSIONING THE BELTS
PLEASE MAKE SURE YOU CHECK THE TENSION OF THE BELT AFTER THE FIRST 15 HOURS OF OPERATION
If the operator notices, the grinding spindle is turning irregular or noisy or in the worse case, the grinding spindle does not turn
although the motor turns. It is recommended to check the belts.
ATTENTION: NEVER “OVER” TENSION THE BELT, THE BELT WILL BE DISTROYED AND IT WILL NEVER RECOVER ITS ORIGINAL
TENSION
Remove the revision cover (Figure 7.4.1) and turn the screw (Figure 7.4.2) clockwise to tight the belt. The tightening force of one
belt is 207 N measured by OPTIKRIK 1 .
7.5 CHANGING THE BELTS
Figure 7.4.2
Figure 7.4.1
Figure 7.5.3
Figure 7.5.2
Figure 7.5.1
Figure 7.5.4
Figure 7.5.6
Figure 7.5.5
Figure 7.5.7