The main voltage corresponds to the voltage on the refrigerator 220V/50Hz/1 Ph;
To ensure proper operation it is essential for the power supply voltage to come within a range
of +/- 6% of the unit's rated voltage. The electric system to which the refrigerator is sized to
cater for the rated electric output of the buffet unit being installed. The electronic system to
which the refrigerator is connected is made in compliance with current standard requirements.
The electric connections and the installation of the thermomagnetic circuit breaker have been
done by qualified person.
Connecting steps:
•
Install a thermomagnetic circuit breaker suited to the rated output of the unit being
installed
•
Connect the refrigerator unit to the thermomagnetic circuit breaker outlet
•
Check that the refrigerator is in order as demonstrated by the pilot light incorporated in
the main switch coming on
9. Maintenance Instructions
The smooth operation and life of the equipment are mainly determined by correct and regular
maintenance.
Cleaning:
Regular cleaning of the refrigerator unit is strongly recommended each month. Please follow
the instructions below.
•
Disconnect the refrigerator power supply cable from the main
prior to carrying out any type of cleaning operation.
•
Cleaning the refrigerator surface:
Clean the refrigerator with
mild detergent and then dry it with a soft cloth.
Do not use
abrasive detergents!
•
Cleaning the inside of the refrigerator:
Clean the inside area
each month with a food safe detergent
•
Cleaning the condenser:
For an efficient operation of the
refrigerator it is advisable to clean the condenser regularly
approximately every 4 months with a dry brush or vacuum cleaner.
6
V.1.0 | October 2014
©Supera
