Super X8DTL-3 User Manual Download Page 82

Page: 82 / 97

4-20

X8DTL-3/X8DTL-i/X8DTL-3F/X8DTL-iF User's Manual

tion embedded in the CPU. The High Performance Event Timer is used to replace

the 8254 Programmable Interval Timer. The options are

Enabled

and Disabled.

PS2 KB/MS Wakeup

Select Enabled to "wakeup" the system when you press the PS2 Keyboard or

Mouse. The options are Enabled and

Disabled

ACPI Aware O/S

Enable ACPI support if it is supported by the OS to control ACPI through the Operat-

ing System. Otherwise, disable this feature. The options are

Yes

and No.

ACPI APIC Support

Select Enabled to include the ACPI APIC Table Pointer in the RSDT (Root System

Description Table) pointer list. The options are

Enabled

and Disabled.

APIC ACPI SCI IRQ

When this item is set to Enabled, APIC ACPI SCI IRQ is supported by the system.

The options are Enabled and

Disabled

Headless Mode

Select Enabled for the system to function normally without a keyboard, monitor and/

or mouse attached. The options are Enabled and

Disabled

ACPI Version Features

Use this feature to select the appropriate ACPI Version for your system to ensure

that the correct RSDP (Root System Description Pointer) Table is used by the sys-

tem. The options are ACPI v1.0,

ACPI v2.0

and ACPI v3.0. For more information,

please refer to ACPI's website at http://www.acpi.info/.

NUMA Support

Select Enabled to use the feature of Non-Uniform Memory Access to improve CPU

performance. The options are

Enabled

and Disabled.



Trusted Computing (Available when a TPM device is

detected and the TPM jumper is enabled)

TCG/TPM (Trusted Platform Module) Support

Select Yes on this item and enable the TPM jumper on the motherboard to enable

TCG (TPM 1.1/1.2)/TPM support in order to improve data integrity and network

security. The options are

and Yes. If this feature is set to Yes, the following

items will display:

Summary of Contents for X8DTL-3


































































































Search results

Summary of Contents for X8DTL-3

Reviews:

Related manuals for X8DTL-3

Brands by name

Popular brands

Super X8DTL-3, User Manual

Search results

Summary of Contents for X8DTL-3

Reviews:

Related manuals for X8DTL-3

Brands by name

Popular brands