4-16
X10SLX-F User’s Manual
XHCI Mode
This feature handles the operation mode for the XHCI (Extensible Host Controller
Interface) controller. The settings are
Smart Auto
, Auto, Enabled, and Disabled.
SATA Configuration
When this submenu is selected, the AMI BIOS automatically detects the presence
of the SATA Devices and displays the following items:
SATA Controllers
This item Enables or Disables the built-in SATA controllers on the motherboard. The
options are
Enabled
and Disabled.
SATA Mode Selection
This item selects the mode for the installed SATA drives. The options are IDE,
AHCI
and RAID.
SATA RAID Option ROM/UEFI Driver (Available if the item above - SATA
Mode Select is set to AHCI or RAID)
Select Enabled to use the SATA RAID Option ROM/UEFI driver for system boot.
The options are
Enabled
and Disabled.
If the item above -SATA Mode Select is set to AHCI, the following items are
displayed:
Serial ATA Port 0~ Port 5
This item displays the information detected on the installed SATA drives on the
particular SATA port.
•
Model number of drive and capacity
•
Software Preserve Support
Port 0 ~ Port 5 Hot Plug
This feature designates the port specified for hot plugging. Set this item to En
-
abled for hot-plugging support, which will allow the user to replace a SATA disk
drive without shutting down the system. The options are
Enabled
and Disabled.
Port 0 ~ Port 5 SATA Device Type
This feature configures the selected SATA port to support either a solid state
drive or hard disk drive. The options are
Hard Disk Drive
and Solid Sate Drive.
