1
STEP
Begin by laying the net out on top of the
trampoline bed.
Find the middle seam on the net and
proceed to attach eight bungee loops
with Q-hook to the clips on the net.
1a).
Next, attach the bungees on the net
to the middle eyebolts on the enclosure
poles. Please make sure that the net does
not twist during this process.
2
STEP
You should now find that the net is hanging from the middle of the poles.
Along the bottom hem of the net you should see small slots (holes).
Each one of these slots corresponds to a steel triangle on the bed. There are the same number of each.
Make sure they line up before attaching the net to the bed.
Attaching the net
Elasticated bungee
with Q hooks
Top Pole
Eyelebolt
Enclosure
Net
3
Find a spring to the right of each enclosure pole. Remove the spring
temporarily from the frame and from the steel triangle on the bed.
Slot the net over the triangular anchor of the bed using the
corresponding spring slot (count to make sure the anchor and slot align
otherwise the net will twist). Once attached, hook the spring back onto
the bed anchor and into the frame as before.
STEP
Enclosure
Net
Slots in the hem of the net
Steel triangles
attatched to bed.
Pole
