3
Thread the quick-release fastener through the
two holes in the clamp and squeeze the clamp
together as tightly as you can.
STEP
5
Next, use the handle on the quick-release
fastener to tighten the clamp together so that
the pole is fixed to the leg securely.
STEP
4
Secure the quick-release fastener by screwing
the bolt on by hand.
STEP
6
Continue this process pole by pole,
ensuring there are two clamps per
pole.
Make sure the clamps are secured
tightly so the poles do not wobble
and the rubber spacers are fixed in
place.
STEP
7
Finish by sliding the foams back over
the poles. Now take each top pole section and fit
onto the corresponding bottom pole section.
Note that there will be an overhang of foam from
the bottom poles so you will need to angle the
top pole section to fit into there.
STEP
Replace Foams
Quick release
fastener
Bolt
