INSTALLATION GUIDE
1. DETERMINE LAYOUT
Refer to ‘LAYOUT DENSITY GUIDELINES’ on page 2 to
determine spacing and amount of LEDs required.
Stroke Width
2. PEEL AND STICK
Remove 3M™ VHB™ tape on the back of modules and
attached to the surface.
CAUTION
When handling the module, avoid pressing
down directly on top of LED lamp
Protect the wire ends o f t h e strand of modules should
not be looped to create a closed circuit.
3. CAP ALL UNUSED WIRES
Using predetermined layout and LED placement
from step 1, divide channels into sections and
distribute each section to corresponding power
supplies.
CAUTION
Before connect with power supplies, check
polarity on every connections
4. CONNECT WITH POWER SUPPLY
FASTENERS:
If desired, modules can be secured
with #4 X 1/2” metal screws.
5. FIX MODULES PERMANENTLY
User Guide
SUPER NOVA 2 RGB
3
Wire Nut
EcolocityLED.com
775-636-6060
1st
2nd
29th
30th
RGB Controller
Power Supply
12VDC Output
Parallel Connection
Channel Depth
