User Guide
SUPER NOVA 2 RGB
2
CONNECTION GUIDE
4”- 5.5”
Place one row
of Modules in
the center of Letter
Place two rows
of Modules
4”to 4.5” apart
Place each row
of Modules
4”to 4.5” apart
Place each row
of Modules
4”to 4.5” apart
5.5”- 8”
8” +
6”+ Circle
Use 10% to 20% shorter
length between modules
than usual for a circular
arrangement
Start Modules at about 2
inches from edge of Letter
Use recommended length for pitch between each module to achieve optimum lighting output while maintaining lowest unit
cost. Failure or misplacing will cause dimmed spots or uneven appearance of light on the surface. 3 inches minimum depth.
LAYOUT DENSITY
GUIDELINES
RECOMMENDED PITCH PER DEPTH
4.75”
4.75”
5”
6”
4”
4”
2.75
3”
RECOMMENDED LAYOUT DENSITY PER CHANNEL WIDTH
CONNECTION WITH
POWER SUPPLY
Output (W)
Recommended
Extension Wire
Output (A)
Max Module Quantity
Maximum Length
40W
3.4A
60 pcs
25FT (7.62M)
20W
1.7A
30 pcs
25FT (7.62M)
60W
5A
90 pcs
25 FT (7.62M)
120W
10A
180 pcs
25FT (7.62M)
SUPER NOVA 2 RGB - MODULES PER WATTS OF POWER & EXTENSION OF LEAD WIRES FROM POWER SUPPLY
*Maximum quantity for Super Nova 2 RGB is based on approximately 90% of specified capactiy of power supplies for
extended lifespan. Equip with protective box for outdoor use and the box should have ventilating holes.
EcolocityLED.com
775-636-6060
CAUTION
Keep extension lead wires as short as possible.
Refer to below table for specific length.
1st
2nd
49th
50th
1st
2nd
49th
50th
1st
2nd
49th
50th
RGB Controller
Power Supply
AC Input
12VDC Output
Parallel Connection
RGB Controller Type
4 Pin & 3 Loop cables
(Common Anode)
Maximum driver quantity per serial connection is limited to 50. Using more quantity per run will cause overload from Power
Supply which damages all connected products. This will cause voltage drop and also dimmed lighting output.
Make sure that each run should have 50 modules at max in a serial connection
(end to end module connection) & should use another run in parallel to connect more.
Should use thicker wires which can take larger amount of current
than the amount transmitted from the power supply unit.
(parallel)
(serial connect)
22AWG
22AWG
18AWG
18AWG
(stranded)
