User Guide
SUPER NOVA 2 RGB
1
PHYSICAL
Use precautions to avoid damages to the product or injuries of users. Any actions against following contents can cause serious
issues such as malfunction, electric shock, or burn.
USE DC 12V INPUT ONLY!
DC12V
DO NOT USE AC INPUT!
AC120V
Do not cut or rejoin wires while product
is connected with live power source
Maximum driver quantity per serial
connection is limited to available power supply
wattage, failure causes overload of current and
damages to the product
Refer to ‘WIRE THICKNESS’ table to use proper
wire thickness between 12V power supply
dimmed output.
Cable length between power supply and the
ted. Refer to
‘CONNECTION WITH POWER SUPPLY’ on page 2
Do not use the product under any of the
circumstances listed below:
- High temperature locations over 140˚F (60˚C)
- Spots with extreme moisture or dust
- Places that have corrosive gas or have highly
Avoid performing installation under rain
or high humidity and only install in
temperatures above 50˚F (10˚C) to allow for
better mounting tape adhesion
Do not perform actions listed below:
- Alter or modify Modules
- Touch LED lamps with sharp objects
- Put glue or silicon over the LED lamps
PRECAUTIONS
PREPARATION
PREPARE CHANNEL LETTERS
SUPPLIES REQUIRED
TOOLS REQUIRED
Wire Nuts, Cable Ties, IDC Connectors, Wire (Optional : Screws)
Wire Stripper, Drill, Screw Driver, towel or rag.
ELECTRICAL
THERMAL
Cooling : Ambient air
Maximum operating temperature : 140˚F (60˚C)
Minimum operating temperature : -13˚F (-25˚C)
Maximum storage temperature : 140˚F (60˚C)
Minimum storage temperature : -22˚ F (-30˚C)
SPECIFICATIONS
3. Use bushing to protect incoming wires
from sharp edge of Channel Letter
2. Drill a hole for power wire
1. Clean moisture , dust and oil from the
inside of letter using Rubbing Alcohol
for best adhesion of mounting tape
EcolocityLED.com
775-636-6060
1.57”
1.57”
1.57”
1.78”
1.78”
1.78”
1.78”
1.38”
1.38”
1.38”
0.7
9”
0.79”
0.79”
0.7
9”
0.91”
0.
33
”
0.
33
”
0.
57
”
0.
57
”
0.
38
”
0.38”
0.
38
”
0.43”
0.
28
”
0.
28
”
0.
23
”
0.21”
0.07
”
0.21”
5.12”
Current dissipation : 55 mA
Power consumption : 0.6 W
Operating power : 12VDC Constant Voltage
Maximum serial connection : 50 modules
Electronic dimming control supported
