19
ENGLISH
Use only 3-wire extension cords that have 3-prong
grounding types plugs and 3-hole receptacles that
accept the tool’s plug as shown in Fig. 5.
Repair or replace damaged or worn cord immediately.
This tool is intended for use on a circuit that has an
outlet and a plug that looks like the one shown In
Fig. 5.
A temporary adapter, which looks like the adapter
illustrated in fig. 6, may be used to connect this
plug to a 2-pole receptacle, as shown in Fig. 6, if
a properly grounded outlet is not available. The
temporary adapter should be used only until a
properly grounded outlet can be installed by a
qualified electrician.
Motor Safety Protection
IMPORTANT: To avoid motor damage, this motor
should be blown out or vacuumed frequently to
keep dust from interfering with normal motor
ventilation.
1. Connect this tool to a power source with the
appropriate voltage for your model and a 20-
amp branch circuit with a 20-amp time delay
fuse or circuit breaker. Using the wrong size
fuse can damage the motor.
Motor specifications and electrical
requirements
Power supply and motor specifications
The AC motor used in this saw universal, nonreversible
type having the following spefications:
Motor: 2200 Walts.
Voltage: 220-240 V.
Amperes: 7,5 A.
Hertz: 50-60 Hz.
R.P.M.: 1300 r.p.m.
Power connections
A separate electrical circuit should be used for your
tools. This circuit should no be less Ø12 wire and
should be protected with a 20 Amp fuse. Have a
certified electrician replace or repair a worn cord
immediately. Before connecting the motor to a power
line, make sure the switch is in the “OFF” position
and sure that the electric current is of the same
characteristics as stamped on the motor nameplate.
Running low voltage will damage the motor.
WARNING: Do not expose the tool to rain op
operate the tool in damp.
Ground instructions
CAUTION: This tool must be grounded while in use
to protect the operator from electric shock.
In he event of a malfunction or breakdown,
grounding provides a path of least resistance for
electric current to reduce the risk of electric shock.
This tool is equipped with an electric cord having an
equipment- grounding conductor and a grounding
plug. The plug be plugged into a matching outlet
that is properly installed and grounded in accordance
with all local codes and ordinances.
Do not modify the plug provided if it will not fit the
outlet, have the proper outlet installed by a qualified
electrician. Improper connection of the equipment-
grounding conductor can result in risk of electric shock.
The conductor with insulation having an outer
surface that is green with or without yellow stripes
is the equipment-grounding conductor. If repair or
replacement of the electric cord or plug is necessary,
do not connect the equipment-grounding conductor
to a live terminal.
Check with a qualified electrician or service personnel
if the grounding instructions are not completely
understood if in doubt as to whether the tool is
properly grounded.
Fig. 5
Fig. 6