23
Hi-Resolution Color DVR Box Camera User Manual
SECTION 4: DVR USAGE
start time is displayed at the top in the format YYYY/MM/DD HH:MM, and the end
time is displayed below. Use the
UP
and
DOWN
buttons to change the value of the
year, if necessary, the press the
Right
button to move to the next field. Adjust the
value of each field until the desired start time and end time is displayed, then press
ENTER
to confirm the setting and return to the
REC. Setting
screen.
3. To set the media overwrite feature, press the
DOWN
button to highlight
Overwrite
,
then press
ENTER
. When a memory card is full, the overwrite feature writes over
old data on the card to save newer data. In the Overwrite submenu, select
Yes
(to
overwrite old data) or
No
, then press
ENTER
to return to close the submenu.
4. To set the Section value, press the
DOWN
button to highlight
Section
, then press
ENTER
. The Section feature allows you to set the size of recorded files by time length.
In the
Section
submenu, select
15min
,
30min
, or
1hr
, then press
ENTER
to return
to close the submenu.
5. To setup motion detection recording, press the
DOWN
button to highlight
Motion
Detection
, then press
ENTER
.
a. Press
ENTER
again to open the
Mask Area
screen. The mask feature divides the
video image into a grid of blocks, where each block area is selected to either sense
for motion or be ignored. Blocks selected for motion detection are highlighted
blue, and the cursor position is highlighted pink. To select a block area or deselect
a selected block area, use the
UP
,
DOWN
,
RIGHT
, and
LEFT
buttons to move the
cursor to the block, then press
ENTER
. Use this method to define only the areas of
