17
Hi-Resolution Color DVR Box Camera User Manual
SECTION 3: SETUP MENU USAGE
NOTE
If you move the cursor to CLR and press SET, all the letters are deleted. To edit a single
letter, move the cursor to the joystick left arrow, then press SET. Move the cursor to the
letter being removed, then press SET. Move the cursor over the letter to be inserted, then
press SET again.
•
MOTION
: If you connect an alarm device to the camera, you can monitor activities
more efficiently because a signal is generated by the camera whenever a motion is
detected. The motion detection signal is output through the MD OUT port.
—
OFF
: Deactivate the MOTION function.
—
ON
: Activate the MOTION function.
AREA SELECT
: You can select up to 4 areas to monitor for motion.
AREA STATE
: Determine whether to use the area selected.
HEIGHT
: Adjust the height of the area.
WIDTH
: Adjust the width of the area.
LEFT / RIGHT
: Adjust position of the area left or right.
TOP/BOTTOM
: Adjust position of the area up or down.
DEGREE
: Range: 0 ~ 255 steps
VIEW
: ON / OFF
•
PRIVACY
: ON / OFF. The Privacy feature allows you to hide an area of the screen.
—
AREA SELECT
: You can select up to 8 areas.
—
AREA STATE
: Determines whether to use the area selected.
—
HEIGHT
: Adjust the height of the area.
—
WIDTH
: Adjust the width of the area.
—
LEFT / RIGHT
: Adjust position of the area.
—
TOP / BOTTOM
: Adjust position of the area.
—
COLOR
: Determine area color. You can select 15 kinds of color.
