8
www.supercircuits.com
SECTION 2: INSTALLATION
11. Attach the power extension cable to a 12 VDC adapter or power source and power on
the camera.
12. Verify that video from the camera can be seen on the monitor.
2.4 Aiming the Camera
1. While observing video from the camera, hold the camera in place and loosen the
directional adjustment screw until the camera can move freely.
2. Point the camera at the center of your surveillance target. Correct the horizontal
alignment of the picture, and then tighten directional adjustment screw.
3. Set the zoom and focus to produce the best framing and clarity of your surveillance
target.
a. If your camera has a manual iris adjustment, rotate the aperture ring to produce
the best picture quality.
b. If your camera lens has an direct drive auto-iris lens, adjust the
LEVEL
control
to produce the best picture quality during average brightness levels of your
surveillance target.
