1
MVL24KIT_SQ
5/21/12
The mounting bracket components can be combined in different ways to adapt to most installation
environments.
Rubber
washer
Adjustment
knob
1.
Assemble the mounting bracket components as needed. Ensure that the assembly is tightly fitted
together.
2.
Anchor the camera mounting bracket and gimbal assembly onto a flat surface at the surveillance
location. The hardware kit provided is useful for securing the bracket onto most surfaces.
3.
Attach the rubber washer (included in the hardware kit) onto the gimbal bolt.
4.
Loosen the adjustment knob.
5.
Screw the gimbal bolt into the threaded hole on the underside of the camera.
6.
Aim the camera at your surveillance target, then tighten the adjustment knob.
7.
Attach the antenna to the back of the camera assembly.
Power cord
Antenna
connector
PAIR button
(under cap)
8.
Plug the camera power cord into the 12 Vdc power adapter provided, then plug the power adapter
into a standard 120 Vac outlet.
WARNING: Do not
use the 12 Vdc power adapter provided for the
RX module with the MVL24CM camera.
Step 2. Installation - RX module
1.
Find a location for the RX module that is within 500’ of the camera. If obstructions (walls, etc.)
exist between the camera and RX module, the module must be positioned closer to the camera.
The RX module can be anchored to the mounting surface, if necessary. The hardware kit provided is
useful for securing the module onto most surfaces.
The MVL24KIT 420 Line 2.4 GHz Digital Wireless video IR camera kit is a reliable and exceptionally easy to
install monitoring solution for home or office. It includes these features:
•
30’ IR Range
•
500’ line of sight (camera to receiver) range
•
Weather-resistant IP55 housing
•
Red LED deterrent light built-in
•
Digital wireless frequency hopping technology
•
3 dB omnidirectional antenna
A local area can accommodate up to 4 camera - receiver systems concurrently.
The MVL24KIT is composed of three SKUs: MVL24CM Digital Wireless IR Camera, MVL24RX 2.4 GHz Digital
Wireless Receiver, and CON-4 female RCA to male BNC Adapter. An optional hi-gain antenna is available
for the MVL24RX receiver to improve reception and extend the range of the system.
What’s in the box:
MVL24CM Digital Wireless IR Camera:
•
Camera assembly
•
12 Vdc power adapter
•
Antenna (1)
•
Mounting bracket and gimbal assembly
•
Hardware kit
MVL24RX 2.4 GHz Digital Wireless Receiver:
•
Receiver (RX) module
•
12 Vdc power adapter
•
Antenna (1)
•
A/V cable
•
Hardware kit
Step 1. Installation - camera
The camera is installed onto a mounting bracket and gimbal assembly, then powered on.
Gimbal Assembly
Mounting bracket components
MVL24KIT Digital Camera/Receiver System Setup and Usage Guide
