2
www.supercircuits.com
© 2010 Supercircuits, Inc. All rights reserved.
•
Connect the power adapter to the power connector on the video – power cable
harness. NOTE: An additional power adapter, also include, is for powering the
DVR without using the video - power cable harness.
Step 2. Setup the DVR
•
Plug the power adapter into a standard electrical outlet to power on the system.
•
While pressing the (power) button on the side of the MON1 monitor, look into
the eyepiece. You should see a video image from the camera.
Power
Button
Focus
Adjust
Video In
•
The DVR is pre configured for alarm contact recording. The default password
for the DVR is 0000.
Note:
You must use the included software to play back the
video files. You can also use the software to convert to a standard AVI format.